Engineering & Science Associates Co., Ltd. Climet
ReadyPlanet.com
dot
dot
bulletPROCESS GAS ANALYSIS / MONITORING
bulletEMISSION MONITORING
bulletGAS COOLER / DRYER
bulletCOMBUSTION EFFICIENCY MONITORING
bulletBIOGAS ANALYSIS
bulletMOISTURE MEASUREMENT
bulletLIQUID ANALYSIS
bulletVACUUM / PRESSURE MEASUREMENT & CONTROL
bulletPRESSURE GAUGE
dot
dot
bulletEXHAUST EMISSION GAS ANALYSIS
bulletPORTABLE GAS ANALYSER
bulletGAS DETECTOR TUBES
bulletGAS STANDARD GENERATOR
bulletPARTICLE COUNTER
bulletMICROBIAL AIR SAMPLER
bulletFLOW MEASUREMENT & CONTROL


Climet

 

Airborne Particle Counter

 

100 LPM (1 Cubic meter sample in 10 minutes)

CI-1054 -100 LPM (1 Cubic meter sample in 10 minutes) - USB for data transfer and supports barcode reader functionality

 The smallest, lightest and fastest particle counter on the market.Full featured airborne particle counter for 100 LPM.

Counts 0.5, 1, 3 and 5 micron particles. Communicates via RS-232, 

Ethernet Modbus and TCP/IP. At 100LPM, this unit can sample continuously for 4 hours.

 

 

CI-1053 - 100 LPM (1 Cubic meter sample in 10 minutes) - Ethernet Modbus TCP/IP communication

 The smallest, lightest and fastest particle counter on the market. Full featured airborne particle counter for 100 LPM.

Counts 0.5, 1, 3 and 5 micron particles. Communicates via RS-232, Ethernet Modbus and TCP/IP. At 100 LPM,

this unit can sample continuously for 4 hours.

 

 

 

75 LPM

CI-754 - USB for data transfer and supports barcode reader functionality

Full featured airborne particle counter for 75 LPM. Counts 0.3, 0.5, 1 and 5 micron particles.

Communicates via RS-232,Ethernet Modbus and TCP/IP. At 75 LPM,

this unit can sample continuously for 4 hours.

 

  

CI-753 - Ethernet Modbus TCP/IP communication

Full featured airborne particle counter for 75 LPM. Counts 0.3, 0.5, 1 and 5 micron particles.

Communicates via RS-232, Ethernet Modbus and TCP/IP. At 75 LPM,this unit can sample continuously for 4 hours.

 

 

CI-750t

CLiMET’s full featured airborne particle counter for 75 LPM.

Automatic PASS/FAIL report for FS-209E, ISO 14644 or EU GMP Annex 1.

Achieves 21CFR11 compliance with optional software.

 

 

50 LPM


CI-454 - USB for data transfer and supports barcode reader functionality

CLiMET's full featured airborne particle counter for 50 LPM.Counts 0.3, 0.5, 1 and 5 micron particles.

Communicates via RS-232, Ethernet Modbus and TCP/IP. At 50 LPM this unit cansample continuously for 5 hours.

 

CI-453 - Ethernet Modbus TCP/IP communication

CLiMET’s full featured airborne particle counter for 50 LPM. Counts 0.3, 0.5, 1 and 5 micron particles.

Communicates via RS-232, Ethernet Modbus and TCP/IP.

At 50 LPM this unit can sample continuously for 5 hours.

 

 CI-450t

CLiMET’s full featured airborne particle counter for 50 LPM.

Automatic PASS/FAIL report for FS-209E, ISO 14644 or EUGMP Annex 1.

Achieves 21CFR11 compliance with optional software.

 

 

1 CFM

CI-154 - USB for data transfer and supports barcode reader funtionality

CLiMET's full featured airborne particle counter for 1 CFM. Counts 0.3, 0.5, 1 and 5 micron particles.

Communicates via RS-232, Ethernet Modbus and TCP/IP. At 1 CFM this unit can sample continuously for 6 hours.

 

CI-153 - Ethernet Modbus TCP/IP communication

 CLiMET’s full featured airborne particle counter for 1 CFM. Counts 0.3, 0.5, 1 and 5 micron particles.

Communicates via RS-232, Ethernet Modbus and TCP/IP. At 1 CFM this unit can sample continuously for 6 hours.

 

CI-150t

 CLiMET’s full featured airborne particle counter for 1 CFM. 

Automatic PASS/FAIL report for FS-209E, ISO 14644 or EU GMP Annex 1. Achieves 21CFR11 compliance with optional software.

 

 

CI-3100 21-1-2-6 - Ethernet Modbus TCP/IP communication

 Remote Sensor with internal vacuum pump that counts 0.5 and

5 micron particles at 1 CFM. Easy to install and validate.

 

 

 

Remote Sensor

 CLiMET produces a wide variety of airborne particle counting

sensor for the continuous monitoring of Clean Rooms.

 

 

 

Microbial Sampler

CI-90

 The first microbial sampler designed to CLiMET standards.

Designed specifically to comply with ISO 14698.

 

 

CI-95

 Microbial sampler using impaction technology.

Designed specifically to comply with ISO 14698. Created to CLiMETstandards.