Engineering & Science Associates Co., Ltd. Hand held instrument for precision measurement of pressure, flow velocity, temperature and other parameters...
ReadyPlanet.com
dot
dot
bulletPROCESS GAS ANALYSIS / MONITORING
bulletEMISSION MONITORING
bulletGAS COOLER / DRYER
bulletCOMBUSTION EFFICIENCY MONITORING
bulletBIOGAS ANALYSIS
bulletMOISTURE MEASUREMENT
bulletLIQUID ANALYSIS
bulletVACUUM / PRESSURE MEASUREMENT & CONTROL
bulletPRESSURE GAUGE
dot
dot
bulletEXHAUST EMISSION GAS ANALYSIS
bulletPORTABLE GAS ANALYSER
bulletGAS DETECTOR TUBES
bulletGAS STANDARD GENERATOR
bulletPARTICLE COUNTER
bulletMICROBIAL AIR SAMPLER
bulletFLOW MEASUREMENT & CONTROL


Hand held instrument for precision measurement of pressure, flow velocity, temperature and other parameters...  
รหัส : M-maPress Duo
ยี่ห้อ : madur
รุ่น : maPress Duo
รายละเอียดย่อ :
Three channel precision manometer for pressure, suction and differential pressure. Every combination of the multiple pressure channels is possible.
Precision draught, pressure and differential pressure measurement. High accuracy coupled with a resolution of 0.1 Pa and an IR printer interface make the instrument ideal for chimney draught and air-conditioning testing. A range of options and additional features makes the instrument even more attractive.
รายละเอียดทั้งหมด :

  Standard configuration

  • Measurement
    • Pressure, suction and differential pressure channel 0...±20 hPa with 0.1 Pa resolution
    • Pressure, suction and differential pressure channel 0...±200 hPa with 1 Pa resolution
    • Flow velocity measurement using Pitot tube
    • Relative humidity measurement
    • Optional temperature measurement using K type thermocouple
    • Temperature measurement with Pt500
    • Temperature display in °C or °F
  • Processing and presentation of measuring data
    • All results shown on display
    • Averaging of all measured values. Averaging time: 2, 10, 20, 30, 60, 120, 180 seconds
    • Display in hPa, Pa, mmH2O, "H2O
    • Graphical presentation of all measured values as diagram
    • HOLD - function
    • Storage for 16 measurements - "measure now, print later"
    • Powerful PC programme for analyser settings and data communication
  • Software properties
    • Automatic zeroing when the analyser is switched on
    • All settings for the analyser carried out with PC programm
    • Permanent automatic check of the instruemnt with acoustic warning and full information in the "control list"
  • Hardware properties
    • Integrated clock/calendar
    • IR interface for external printer
    • Incredible 75 hours operating time from one set of batteries
    • Full graphic display LCD 66 x 36 mm
    • RS-232C interface and multifunctional PC program
    • Updateable FLASH ROM program memory
    • Simple, intuitive operation, like a mobile phone

Optional accessories

  • Atmospheric pressure channel 800...1200 hPa
  • leather-look case for storage and rubber boot for protection of the instrument
  • Magnetic plate to attach the instrument to steel surfaces
  • External thermal printer with wireless IR communication

Technical Data

    • Size 245 x 116 x 45 mm
  • Weight 450 g
  • Display 38 x 66 mm
  • Power supply 6 V ( 4 x AA) Battery
  • External power supply 9 VDC
  • Operating temperature 10 °C ÷ 50°C
  • Storage temperature -20 °C ÷ +55 °C

Parameter Method Range Resolution Accuracy Lower
detection limit
Reaction time(T90)
T1 - Temperature Thermocouple -20..1000°C 0.1 or 1°C ± 2 °C 0.1 °C 10 s
T2 - Temperature Pt-500 -20..100°C 0.1 or 1°C ± 1 °C 0.1 °C 10 s
Pressure/ diff. pressure - channel 1 3)
DMS Bridge 0...±20 hPa 0.1 or 1Pa ±1 Pa or 1 % rel. 1 Pa 10 s
Pressure/ diff. pressure - channel 2 4)
DMS Bridge 0...±200 hPa 1Pa ±10 Pa or 1 % rel. 1 Pa 10 s
Atmospheric press. - channel 3 (option)5)
DMS Bridge 800...1200 hPa 0.1 hPa ± 2 hPa 800 hPa 10 s
rH -Relative humidity Capacitance sensor 5...95 % 0.01 % ±2 % 5 % 45 s
V - Flow velocity Pitot tube 1..30 m/s 0.1 m/s 0.5 m/s 1 m/s 10 s

Notes:

1) The temperature measurement channel type K (Ni-CrNi) is standard equipment in the pressure meter. An appropriate probe for the measurement is available as an option.

2) The temperature mesurement channel type Pt500 is standard equipment in the pressure meter. An appropriate probe for the measurement is available as an option, either for temperature measurement alone or combined with a sensor for relative humidity.

3), 4), 5) The accuracy of the measurement channel in hte pressure meter is valid only if the pressure meter has been warmde-up for at least 20 minutes, is in an immobile horizontal position and that a zero has been carried out within the previous 15 minutes.

4) The quick-fit connections will leak if used for suction measurements. For suction measurements connect the tube directly to the nipple on the pressure meter.

 



หากสนใจ กรุณากรอกรายละเอียดเพื่อติดต่อกลับ
Name / ชื่อ :  *
Position / ตำแหน่ง :
Company / บริษัท :  *
Address / ที่อยู่ :
Province / จังหวัด :
Country / ประเทศ :
Tel. / โทรศัพท์ :  *
Mobile / มือถือ :
E-mail / อีเมลล์ :
Message / ข้อความ :  *