Engineering & Science Associates Co., Ltd. Series 3000T - Trace Oxygen Analyzers
ReadyPlanet.com
dot
dot
bulletPROCESS GAS ANALYSIS / MONITORING
bulletEMISSION MONITORING
bulletGAS COOLER / DRYER
bulletCOMBUSTION EFFICIENCY MONITORING
bulletBIOGAS ANALYSIS
bulletMOISTURE MEASUREMENT
bulletLIQUID ANALYSIS
bulletVACUUM / PRESSURE MEASUREMENT & CONTROL
bulletPRESSURE GAUGE
dot
dot
bulletEXHAUST EMISSION GAS ANALYSIS
bulletPORTABLE GAS ANALYSER
bulletGAS DETECTOR TUBES
bulletGAS STANDARD GENERATOR
bulletPARTICLE COUNTER
bulletMICROBIAL AIR SAMPLER
bulletFLOW MEASUREMENT & CONTROL


Series 3000T - Trace Oxygen Analyzers  
รหัส : TAI-3000T
ยี่ห้อ : Teledyne Analytical Instrument
รุ่น : 3000T Series
รายละเอียดย่อ :
General purpose oxygen analyzer, disposable sensor, microfuel cell, autocalibration, RS-232C

Semi-explosion proof and Fully explosion proof available.
รายละเอียดทั้งหมด :

 

Model 3000TA - general purpose unit

Series 3000T - Trace Oxygen Analyzers

The Series 3000T Trace Oxygen Analyzers provides powerful microprocessor technology while offering tremendous versatility in the low ppm ranges. This instrument offers three user-selectable linear ranges, high accuracy, fast response, adjustable alarms, and auto diagnostics.

No zero gases are required in most applications. The heart of the analyzer is a specially qualified Micro-fuel Cell designed to measure oxygen in the gas sample.

The sensor is unequaled in the industry for its accuracy, sensitivity, and reliability. The instruments can be used as a separate unit or as a component of a larger analytical system.

Applications include: Air separation, Petrochemical, Chemical processes, Furnace

Model 3000TB - wall mount unit

The Model 3000TA-XL High Sensitivity Trace Oxygen Analyzer is a cost-effective instrument for measuring oxygen in the 0-1 ppm region. This analyzer offers three dynamic, user-configurable ranges and can be calibrated in any range.

The instrument comes standard with two sets of analog outputs for oxygen concentration and range identification. A bi-directional RS-232C serial communication interface provides for remote monitoring and control of span and zero functions.

The heart of the 3000TA-XL is Teledyne's own B-2CXL sensor which is specific to oxygen and can be used in a variety of background gases including hydrocarbons.

The Model 3000TB Oxygen Analyzer is the bulkhead mount version in the 3000 series of full service oxygen analyzers. This unit provides the latest in powerful microprocessor technology while offering tremendous versatility.

Designed with the user in mind, this unit offers three user-selectable linear ranges, high accuracy, fast response, two adjustable alarms, and auto diagnostics. No zero gases are required.

3000 Trace Series Overview
3000TA-XL Panel mount 0-1 ppm O2
3000ZA-XL Panel mount 0-5 ppm O2, ZrO2 type
3000TA Panel mount 0-10 ppm O2 and above
3000TB Wall mount 0-10 ppm O2 and above
3010TA Split architecture - panel mount control unit 0-10 ppm O2 and above
3010TB Split architecture - wall mount control unit 0-10 ppm O2 and above
3010TAC Split architecture - I/S Cenelec, panel mount control unit 0-10 ppm O2 and above
3010TBC Split architecture - I/S Cenelec, wall mount control unit 0-10 ppm O2 and above
3020T Fully explosion proof unit unit 0-10 ppm O2 and above



Data sheets for the complete line of instruments are available as PDF documents for download

 

Model 3010TA - Split architecture version with general purpose control unit Model 3010TB - Split architecture version with wall mount control unit

The Model 3010TA Trace Oxygen Analyzer is designed as a split architecture version of the 3000 series. A general purpose control unit, designed for non-hazardous areas, controls a specially developed analysis unit that can operate in a hazardous area.

The explosion proof enclosure is NEMA 4/7 rated, U/L and CSA listed for Class I, Division 1, Groups B, C, and D service. Options include cal/zero valves and flame arrestors

Model 3020T - totally explosion proof configuration

The Model 3010TB Trace Oxygen Analyzer is designed as a split architecture version of the 3000 series. A bulkhead mount, NEMA 4 rated control unit designed for non-hazardous areas, controls a specially developed analysis unit that can operate in a hazardous area.

The explosion proof enclosure is NEMA 4/7 rated, U/L and CSA listed for Class I, Division 1, Groups B, C, and D service. Options include cal / zero valves and flame arrestors.

The 3020T Trace Oxygen Analyzer serves as the completely explosion proof version of the 3000 series. This unit provides superior oxygen analysis in an explosion proof enclosure rated at NEMA 4/7, U/L and CSA listed for Class I, Division 1, Groups B, C, & D service.

Three user-programmable ranges and auto ranging come standard with an excellent linearity precluding the need to recalibrate when changing ranges. Fully programmable alarms provide versatility, and an array of Teledyne's advanced Micro-fuel Cell sensors can be utilized depending on the customer's needs - such as fast response or long life.



หากสนใจ กรุณากรอกรายละเอียดเพื่อติดต่อกลับ
Name / ชื่อ :  *
Position / ตำแหน่ง :
Company / บริษัท :  *
Address / ที่อยู่ :
Province / จังหวัด :
Country / ประเทศ :
Tel. / โทรศัพท์ :  *
Mobile / มือถือ :
E-mail / อีเมลล์ :
Message / ข้อความ :  *